top of page
UPVC & Hard Plastic Epoxy Repair Putty Kit

UPVC & Hard Plastic Epoxy Repair Putty Kit

Product Information. 


This is a high quality two part epoxy repair putty kit.

This kit is specifically formulated for repairing chips, cracks, holes and similar damage to UPVC & hard plastics.

The putty is fully waterproof and weatherproof once cured and suitable for interior and exterior use.

It has outstanding resistance to all household cleaners whilst being heat resistant up to 130C.

The Acrylic Varnish dries crystal clear to give the repair a High Gloss finish.

This product will repair damage up to: 4cm Long, 4.5cm Wide & 3cm Deep.



This Kit Contains:


1 x 38g Epoxy repair Putty (Part A & Part B)      

1 x Application Spatula 

1 x Wet & Dry Sanding Paper                           

1 x 10ml Acrylic Varnish Clear

1 x Instruction Leaflet

  • How To Use.

    1.  Carefully and lightly rub down the damaged area with the Wet & Dry  Sanding Paper to provide a key.

    2.  Wipe the surface remove any dust.

    3.  Ensure the surface is clean and dry.

    4.  Cut equal parts of part A & B to the required length for the repair needed.

    5.  This step is important: Mix the equal parts of A & B putty by hand until it is a uniform colour throughout, this takes approximately 6 minutes of kneading / rolling.

    6.  Apply the putty to the area to be repaired immediately, filling and shaping to suit the area as required. (The working time is approximately 15 minutes).

    7.  Keep your fingers and spatula moistened with water to better shape and smooth the putty.

    8.  Apply and press the putty firmly to the damaged area.

    9.  To obtain a smooth finish immediately wipe and smooth the putty      gently with a wet finger or spatula to the shape required.

    10.  Leave to fully cure, approximately 3 – 4 hours.

    11.  Clean all tools immediately after use with water.

    12.  Once the putty is cured apply a thin coat of the Acrylic Varnish using the brush in the bottle and leave to dry for 2 to 3 hours.

    13.  If required, apply a second thin coat of the Acrylic Varnish and leave to dry overnight.

    14.  Please ensure that you apply the varnish to the Epoxy Putty only and not on to the surrounding area.

    15.  Any excess Acrylic Varnish that is accidentally applied onto the surrounding area can be wiped off with damp kitchen towel.


    If you are not satisfied with your purchase, you can return the product and get a full refund. You can return a product for up to 30 days from the date you purchased it.


    Free Delivery 1-2 Day Postage to ANY UK Post Code.

Product Page: Stores_Product_Widget
bottom of page